800-446-4035

AEMC Instruments 2130.31 6550 Digital/Analog Graphical Megohmmeter - 10,000V

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • AEMC Instruments 2130.31 6550 Digital/Analog Graphical Megohmmeter - 10,000V

AEMC Instruments 2130.31 6550 Digital/Analog Graphical Megohmmeter - 10,000V w/Auto DAR/PI & DD

Availability: Available

$5,295.00

SKU: 2130.31


Details

The AEMC Instruments model 6550 is a high-end portable megohmmeter intended for the measurement of a wide variety of electrical insulation resistance values on cables and devices operating at high voltage. It is the only fully automated 10,000V graphical insulation tester. The Model 6550 is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView® software provided. This megohmmeter can operate on battery or AC power while testing.

The model 6550 also offers the ability to program up to three step voltage profiles (from 40 to 15,000V), each containing up to ten steps. There are also three ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000 and 10,000V.

Features:

  • Detection and measurement of input voltage, frequency, and current prior to running a test
  • Measurements at a fixed test voltage of 500, 1000, 2500, 5000 or 10,000V
  • Measurements at an adjustable test voltage between 40 and 10,000V
  • Ramp voltage measurements with a ramp from 40 to 1100V or from 500 to 10,000V
  • Step voltage measurements with steps from 40 to 10,000V
  • Non-destructive (Early break) test, test stopped at a preset current (Break at I-limit) or Burn mode with no predefined stop point
  • Digital filtering of insulation measurements
  • Live measurement of the voltage to warn the operator of potential unsafe conditions
  • Programmable thresholds to trigger audible
  • Timed measurement duration checks
  • Fuse protection with display indication of defective fuse condition
  • Stores up to 80,000 measurements
  • Optically-isolated USB communication for transfer onto PC and and report generation with the included DataView® software

Ram Meter carries the AEMC Instruments 2130.31 6550 Digital/Analog Graphical Megohmmeter - 10,000V w/Auto DAR/PI & DD in addition to a full line of Insulation Resistance Testers products. For questions about the AEMC Instruments 2130.31 6550 Digital/Analog Graphical Megohmmeter - 10,000V w/Auto DAR/PI & DD and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer AEMC Instruments
Model Number 6550 / Cat # 2130.31
Spec Sheet AEMC_6550_Specs.pdf
Power 120 ACV, 240 ACV, Battery Powered
Display Digital
Test Voltage 10,000V
Safety Rating CAT IV-1000V
Extra Features Auto DAR Calculation, Auto DD Calculation, Auto PI Calculation, Ramp Test
Additional SKUs 2130.31