Jaquet E16A40 - VRS Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Jaquet E16A40 - VRS Sensor

Jaquet E16A40 - VRS Sensor w/M16x1.5 4.0" Thread

SKU: E16A40

Call For Price

Quick Overview

Please Note: We are currently experiencing delivery issues with this manufacturer. Contact us at 1-800-446-4035 for details and to order over the phone.


The Jaquet E16A40 series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.


  • Signal Output: the signal frequency is proportional to the target speed
  • Thread Length: 4.0" M16x1.5 thread
  • 0-20 kHz Frequency Range
  • Housing: M16x1.5, tightening torque: max. 35 Nm
  • Connection: Connector, M12x1 thread, 4 pins, black
  • Coil Inductance: 170 mH +/-10% at 1 kHz
  • Coil Resistance: 850 Ohm +/-10%
  • Coil Magnet Polarity: North pole towards front face
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Ram Meter carries the Jaquet E16A40 - VRS Sensor w/M16x1.5 4.0" Thread in addition to a full line of Speed Sensors products. For questions about the Jaquet E16A40 - VRS Sensor w/M16x1.5 4.0" Thread and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer Jaquet
Model Number E16A40
Spec Sheet Jaquet_E16A40_Specs.pdf
Sensor Type VRS Sensors
Supply Voltage N/A
Mounting Thread M16x1.5
Thread Length 4.0"-5.0"
Termination Connector
Additional SKUs No