800-446-4035

Jaquet EX10A - VRS Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Jaquet EX10A - VRS Sensor

Jaquet EX10A - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread

SKU: EX10A

Call For Price

Details

The Jaquet EX10A series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

The EX10A is specifically designed for use in explosive atmospheres.

Features:

  • Signal Output: the signal frequency is proportional to the target speed
  • Thread Length: 1.3" M10x1 thread
  • 0-20 kHz Frequency Range
  • Housing: M10x1, tightening torque: max. 10 Nm
  • Connection: Connector, M12x1 thread, 4-pins, black
  • Coil Inductance: 170 mH +/-10% at 1 kHz
  • Coil Resistance: 850 Ohm +/-10%
  • Coil Magnet Polarity: North pole towards front face
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Ram Meter carries the Jaquet EX10A - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread in addition to a full line of Speed Sensors products. For questions about the Jaquet EX10A - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer Jaquet
Model Number EX10A
Spec Sheet Jaquet_EX10A_Specs.pdf
Sensor Type VRS Sensors
Supply Voltage N/A
Mounting Thread M10x1
Thread Length 1.1"-1.5"
Termination Connector
Additional SKUs No