800-446-4035

Jaquet EX34H - VRS Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Jaquet EX34H - VRS Sensor

Jaquet EX34H - VRS Sensor for use in Explosive Atmospheres w/3/4-20 UNEF-2A 1.9" Thread & 10' Leads

SKU: EX34H

Call For Price

Details

The Jaquet EX34H series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

The EX34H is specifically designed for use in explosive atmospheres.

Features:

  • Signal Output: the signal frequency is proportional to the target speed
  • Thread Length: 1.9" 3/4"-20 UNEF-2A thread
  • 0-20 kHz Frequency Range
  • Housing: 3/4"-20 UNEF-2A, tightening torque: max. 40 Nm
  • Connection: 10' Cable for explosion applications
  • Coil Inductance: 170 mH +/-10% at 1 kHz
  • Coil Resistance: 2950 Ohm +/-10%
  • Coil Magnet Polarity: South pole towards front face
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Ram Meter carries the Jaquet EX34H - VRS Sensor for use in Explosive Atmospheres w/3/4-20 UNEF-2A 1.9" Thread & 10' Leads in addition to a full line of Speed Sensors products. For questions about the Jaquet EX34H - VRS Sensor for use in Explosive Atmospheres w/3/4-20 UNEF-2A 1.9" Thread & 10' Leads and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer Jaquet
Model Number EX34H
Spec Sheet Jaquet_EX34H_Specs.pdf
Sensor Type VRS Sensors
Supply Voltage N/A
Mounting Thread 3/4-20 UNEF-2A
Thread Length 1.7"-2.0"
Termination Leads
Additional SKUs No