800-446-4035

Jaquet F16S40 - Hall Effect Zero-Speed Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Jaquet F16S40 - Hall Effect Zero-Speed Sensor

Jaquet F16S40 - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/M16x1.5 4.0" Thread & 39" Leads

SKU: F16S40

Call For Price

Quick Overview

Please Note: We are currently experiencing delivery issues with this manufacturer. Contact us at 1-800-446-4035 for details and to order over the phone.


Details

The Jaquet F16S40 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16S40 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

Features:

  • Signal Output: Square Wave signal output from NPN output transistor with internal 2.7 kOhm pull-up resistor, DC-coupled to supply
  • Thread Length: 4.0" M16x1.5 thread
  • 8-25 DCV Supply Voltage
  • 12 mA (without load) maximum current consumption
  • 0-15 kHz Frequency Range
  • Housing: M16x1.5, tightening torque: max. 35 Nm
  • Connection: 39" Cable with open leads: 3-wire, AWG22, stranded wires, elastomer isolation, green casing
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Ram Meter carries the Jaquet F16S40 - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/M16x1.5 4.0" Thread & 39" Leads in addition to a full line of Speed Sensors products. For questions about the Jaquet F16S40 - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/M16x1.5 4.0" Thread & 39" Leads and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer Jaquet
Model Number F16S40
Spec Sheet Jaquet_F16S40_Specs.pdf
Sensor Type Digital Magnetic & Hall Effect Sensors
Supply Voltage 8-25 DCV
Mounting Thread M16x1.5
Thread Length 4.0"-5.0"
Termination Leads
Additional SKUs No