800-446-4035

Jaquet F58A - Hall Effect Zero-Speed Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Jaquet F58A - Hall Effect Zero-Speed Sensor

Jaquet F58A - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 1.5" Thread

Availability: Available

$89.25

SKU: F58A


Details

The Jaquet F58A series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58A exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

Features:

  • Signal Output: Square Wave signal output from NPN output transistor with internal 2.7 kOhm pull-up resistor, DC-coupled to supply
  • Thread Length: 1.5" 5/8-18 UNF-2A thread
  • 8-25 DCV Supply Voltage
  • 12 mA (without load) maximum current consumption
  • 0-15 kHz Frequency Range
  • Housing: 5/8-18 UNF-2A, tightening torque: max. 35 Nm
  • Connection: Connector, M12x1 thread, 4 pins, black
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Ram Meter carries the Jaquet F58A - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 1.5" Thread in addition to a full line of Speed Sensors products. For questions about the Jaquet F58A - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 1.5" Thread and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer Jaquet
Model Number F58A
Spec Sheet Jaquet_F58A_Specs.pdf
Sensor Type Digital Magnetic & Hall Effect Sensors
Supply Voltage 8-25 DCV
Mounting Thread 5/8-18 UNF-2A
Thread Length 1.1"-1.5"
Termination Connector
Additional SKUs No