800-446-4035

Time Mark Corp. Model 4062 Pump Up Controller

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Time Mark Corp. Model 4062 Pump Up Controller

Time Mark Corp. Model 4062 Pump Up Controller

Availability: Available

$1,260.00

SKU: 4062


Details

The Time Mark Model 4062 is a pump up controller which provides total control for duplex pumping systems. The Model 4062 monitors, controls and displays the liquid level in a tank or reservoir, up to a depth of 34.6 feet. The input to the Model 4062 can be from any 2 or 3-wire transducer with a 4-20mA output that represents 0 to 34.6 feet. A 24VDC regulated probe supply is included. A Level Simulator is provided to aid in programming five set points: Low Alarm, Pumps Off, Level 1, Level 2 and High Alarm.

A universal zero to 30 second On Delay can be programmed to prevent outputs from closing due to input fluctuations caused by turbulent conditions. An additional 4-20mA output with zero and span controls is provided for a chart recorder or other external device. Four heavy-duty 10 amp, 120V contacts are provided for pump control and alarm activation. An auto-dialer or other emergency device can be activated with the SPDT power loss relay. This relay is held open when power is applied.

Features:

  • Duplex Pump Alternation
  • 4-20 mA Input
  • Scaleable 4-20mA Output
  • Hand-Off-Auto Controls
  • Dual Run-time Meters
  • UL Recognized (US and Canadian)

Ram Meter carries the Time Mark Corp. Model 4062 Pump Up Controller in addition to a full line of Pump & Level Controls products. For questions about the Time Mark Corp. Model 4062 Pump Up Controller and other products, or for custom and large orders call us at (800) 446-4035 or contact us online.

Additional Information

Manufacturer Time Mark Corporation
Model Number 4062
Spec Sheet Time_Mark_Model_4062_Specs.pdf
Additional SKUs No