Time Mark Corp. Model B2732 Single-Phase Current Monitor - DPDT, 1-5A, 120VAC w/Adjustable Trip Point

$356.00
SKU
B2732-120VAC

The Time Mark Model 2732 Single Phase Current Monitor is designed to continuously monitor single-phase AC current. It consists of a solid-state sensing circuit driving an internal electromechanical relay. The Model 2732 has two operating modes: over-current sensing or under-current sensing. The operating mode is selected by means of a slide switch on the monitor.

When operating voltage is applied, and the current level is correct according to the operating mode, the relay will energize. A fault condition will cause the OVER/UNDER LED on the monitor to illuminate, and the trip delay will begin. If correct current is restored, the relay remains energized. If current is not restored during the delay period, the relay will de-energize and the red TRIP indicator will illuminate.

The Model 2732 has three reset configurations: automatic, manual (add jumper), or manual remote (add switch). The standard model, as provided, will reset automatically.

Features:

  • Model B2732 = 120VAC Input (100-130VAC voltage range), 50-400 Hz
  • Detects over or under current
  • Adjustable trip delay
  • Automatic or manual reset
More Information
Display No
Features Automatic Reset, Manual Reset
Manufacturer Time Mark Corporation
Measurement Over Current Sensing, Under Current Sensing
Type Current Monitor
Additional Skus 2732, B2732, B2732120VAC
Copyright © Ram Meter, Inc | Instrumentation and Testing Equipment | Powered by Turtlehut™