Jaquet EV58AM25 - VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread

Call for Price

The Jaquet EV58AM25 series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet and an amplifier. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The signal is converted to a square wave signal with constant amplitude by the integrated amplifier. The frequency of the output signal is proportional to the speed of the moving target.

  • Signal Output: Square wave signal from NPN output transistor with internal 2.2 kOhm pull-up resistor, DC-coupled to supply
  • Thread Length: 2.5" 5/8-18 UNF-2A thread
  • 5-32 DCV Supply Voltage
  • 5 mA (without load) maximum current consumption
  • 0-20 kHz Frequency Range
  • Housing: 5/8"-18 UNF-2A, tightening torque: max. 35 Nm
  • Connection: Connector mates with straight plug MS3106A-10SL-3S, 3-pins
  • Coil Inductance: 170 mH +/-10% at 1 kHz
  • Coil Resistance: 850 Ohm +/-10%
  • Coil Magnet Polarity: North pole towards front face
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

  • VRS Sensors
  • Connector
More Information
Manufacturer Jaquet
Length 2.5" Thread Length
Output Square Wave Signal
Size 5/8-18 UNF-2A
Type VRS Sensors
Additional Details

Please Note: We are currently experiencing delivery issues with this manufacturer. Contact us at 1-800-446-4035 for details and to order over the phone.

Copyright © Ram Meter, Inc | Instrumentation and Testing Equipment | Powered by Turtlehut™