Jaquet F12S - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/M12x1 2.0" Thread & 39" Leads


The Jaquet F12S series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F12S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.


  • Signal Output: Square Wave signal output from NPN output transistor with internal 2.7 kOhm pull-up resistor, DC-coupled to supply
  • Thread Length: 2.0" M12x1 thread
  • 8-25 DCV Supply Voltage
  • 12 mA (without load) maximum current consumption
  • 0-15 kHz Frequency Range
  • Housing: M12x1, tightening torque: max. 12 Nm
  • Connection: 39" Cable with open leads: 3-wire, AWG22, stranded wires, elastomer isolation, green casing
  • Operating Temperature: -104-257°F (-40-125°C)
  • Protection: IP68 (Sensor) / IP67 (Cable)
  • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

  • Digital Magnetic & Hall Effect Sensors
  • Leads
More Information
Manufacturer Jaquet
Length 2.0" Thread Length
Output Square Wave Signal
Size M12x1
Type Digital Magnetic & Hall Effect Sensors
Copyright © Ram Meter, Inc | Instrumentation and Testing Equipment | Powered by Turtlehut™