Jaquet F16S - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/M16x1.5 2.0" Thread & 39" Leads

The Jaquet F16S series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

Features:

• Signal Output: Square Wave signal output from NPN output transistor with internal 2.7 kOhm pull-up resistor, DC-coupled to supply
• Thread Length: 2.0" M16x1.5 thread
• 8-25 DCV Supply Voltage
• 12 mA (without load) maximum current consumption
• 0-15 kHz Frequency Range
• Housing: M16x1.5, tightening torque: max. 35 Nm
• Connection: 39" Cable with open leads: 3-wire, AWG22, stranded wires, elastomer isolation, green casing
• Operating Temperature: -104-257°F (-40-125°C)
• Protection: IP68 (Sensor) / IP67 (Cable)
• Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

• Digital Magnetic & Hall Effect Sensors
• Leads