Lascar Electronics EMV 1200-40 Digital Panel Meter - DCV Input w/3-Digit LCD Display & DCV Power
The Lascar Electronics EMV 1200-40 is an easy to mount 3-Digit LCD digital panel meter. To install the meter, the user need only drill a single 5.5mm (7/32") hole in the panel. The meter is fitted to the panel by locating its threaded stud through the hole, fitting the washer and tightening the nut provided. The meters connecting wires pass through the hollow stud into the target application for connection. The meter features a 4 to 40V measurement range with 100mV resolution and is powered from the signal it is measuring. Only valid readings are displayed; the meter indicates "LO" at voltages below 4V and "HI" at voltages above 40V. A rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation.
Features:
- Single Hole Mounting
- 4 to 40V d.c. Full Scale Reading
- 3-Digit LCD Display
- 12.5mm / 0.5" LCD Digit Height
- Reverse Polarity Protection
- 2-Wire Operation
- Splashproof
Display | 3.5-Digit LCD |
---|---|
Input | DC Voltage |
Manufacturer | Lascar Electronics |
Power | DCV |
Type | Digital Panel Meters |
Additional Skus | EMV120040| EMV-1200-40 |