Monarch Instruments 6180-036 MT-190P Magnetic Sensor w/Amplifier - 1/8" stereo plug & 8 ft cable

The Monarch Instruments M-190W Magnetic Sensor is a Self Powered gear sensor that is most popular for use with 60 tooth 20 pitch gears. The sensor mounts within 0.005 inches (0.127 mm) of a minimum 0.106 inch (2.692 mm) diameter ferrous target. The sensor self-generates an AC signal and requires no power from the display module.

The M-190W Magnetic Sensor combines with an Amplifier Module to become the MT-190P. The Amplifier Module enhances the performance of the M-190W sensor by extending the operating gap for the sensor to 0.25 inches (6.35 mm) from the ferrous target. The MT-190P can sense gear teeth, bolt heads or shaft keys. It also provides a pulsed output signal and is TTL compatible with 5 DCV. The MT-190P has an 8 foot([2.438 m) cable with a 1/8"' (3.5 mm) stereo plug termination. .

6180-036 MT-190P Specifications:

M-190W Sensor Specs:
• Speed Range: 1-99,999 RPM
• Operating Distance: 0.005" (0.127 mm) gap from target
• Minimum Target Size: 0.106" (2.692 mm) minimum diameter
• Power required: None - Self Generating AC voltage
• Output Signal: 190V P-P maximum
• Pole Piece Magnet Diameter: 0.106 inch (2.692 mm)
• Operating Temperature: -100° to 225° F (-73° to 107° C)
• Standard Cable Length: 8 feet (2.438 m)
• Dimensions: 2.0" (L) x 0.625" (50.8 x 15.875 mm)
MT-190 Amplifier Specs:
• Power required: 3.3 to 12 DCV, 15 mA
• Operating Distance: extended to 0.25" (6.35 mm) gap from target
• Output Signal: Same as power supplied, TTL compatible with 5 DCV supplied
• Operating Temperature: 20° to 160° F (-6° to 70° C)
• Standard Cable Length: 1.5 feet (0.457 m)
• Dimensions: 2.65" (L) x 1.38" x 1.05" (67.3 x 35.0 x 26.7 mm)

Additional Info

• Digital Magnetic & Hall Effect Sensors
• Leads