Phares MS0303-04 Mini Hall Effect Sensor w/5/8-18 3.0" Thread, 5-24VDC w/Sinking NPN Square Wave Output

$220.00
SKU
MS0303-04

The Phares MS0303 Electric Digital Output Hall Effect Sensor switches logic low ("0") when the magnetic field strength at the sensor face exceeds the hall effect operate point threshold, and switches logic high ("1") when the magnetic field strength falls below release point threshold. The difference in the magnetic operate and release points is the hysteresis of the Hall Effect Sensor. This built-in hysteresis allows clean, fast switching of the output, even in the presence of external mechanical vibration and electrical noise. The omnipolar operation allows activation with either a north or a south polarity field of sufficient strength. In the absence of a magnetic field, the output is off.

Features:

  • MS0303-04 = Sinking NPN Square Wave Output w/4 ft wire length
  • Output Signal: Square Wave
  • Senses magnetic targets
  • Operating voltage range: 5-24 VDC
  • Operating Temperature: -40°F to 140°F
  • Magnetic Pole Detect: North and South (Positive and Negative Field)
  • Dimensions (in inches): 3” Long, 5/8” Diameter, 5/8”-18 UNF Threads
More Information
Manufacturer Phares
Length 3.0" Thread Length
Output Square Wave Signal
Size 5/8-18 UNF-2A
Type Digital Magnetic & Hall Effect Sensors
Additional Skus MS0303, MS0303-4, MS030304, MS03034
Copyright © Ram Meter, Inc | Instrumentation and Testing Equipment | Powered by Turtlehut™