Description

The K110 AC/DC Microprobe is built for the low end. It reads currents as low as 50 µA DC (150 µA AC) up to 400 mA peak — AC and DC — and outputs 10 mV per mA. That’s ten times the signal-per-amp of a standard AC/DC clamp, giving you cleaner waveforms on your oscilloscope and finer resolution on your DMM in the ranges where every microamp counts.

Same slim jaw as the K100 probe. Same non-intrusive clamp-on measurement. Different scaling — tuned for the bench, the R&D lab, and the process-control loop where low-current accuracy is everything.

Features:

• High-gain 10 mV/mA output
• Sub-milliamp resolution
• Scope-ready waveform capture
• True AC and DC in one probe
• Non-intrusive 4-20 mA loop verification
• Slim jaw for crowded wiring.

Applications:

• Industrial & Process Control – Calibrate and troubleshoot 4-20 mA process control loops without ever breaking the circuit.
• Electronics R&D Test Labs – Scope-ready 10 mV/mA output for capturing low-level current waveforms no standard clamp can see.
• Battery & Low-Power Electronics – Sub-milliamp precision for IoT and embedded devices, down to 50 µA.
• Automotive Electronics – Precision parasitic-draw diagnostics in the microamp range.
• EV & E-Mobility – 12 V parasitic draws and BMS sense-line troubleshooting.
• Energy & Renewables – Non-intrusitve standby and low-string measurement on solar/PV systems.