Red Lion Controls PAXTM110 6-Digit Pre-Set Timer w/Green LED Display & DCV Power
The Red Lion Controls PAXTM offers many features and performance capabilities to suit a wide range of industrial applications. The PAXTM can function as an Elapsed Timer or Preset Timer. The Plug-in option cards allow the opportunity to configure the meter for the present application, while providing easy upgrades for future needs. By using two separate signal inputs and 23 selectable timer ranges, the meter can be programmed to meet most any timing application. With the addition of a Plug-in Set Point card, the PAXTM can easily become a dual or quad output preset timer.
The PAXTM accepts inputs from a variety of sources including switch contacts and outputs from CMOS or TTL circuits. The input can be configured to trigger on the edge or level of the incoming pulse. Internal jumpers are available to allow the selection for sinking inputs (active low) or sourcing inputs (active high). The front panel keys and three user inputs are programmable to perform various meter functions. One of the functions includes exchanging parameter lists, allowing for two separate listings of set point values, timer start/stop values, counter start/stop values and RTC daily on and off values.
- PAXTM110 = Green LED Display & DCV Power
- Elapsed Time Indicator
- 1/8 DIN (50 mm x 97 mm)
- 6 Digit, 0.56" (14.2 mm) LED Display
- Elapsed Timer w/Preset Capability
- Counter w/Preset Capability
- Cycle Counting Capability
- Programmable Function Keys/User inputs
- Four Set Point Alarm Outputs
- Communications and Bus Capabilities
- PC Software Available for Meter Configuration
- NEMA 4X/IP65
|Manufacturer||Red Lion Controls|