Texmate DX-35-ACA Lynx Panel Meter with RMS option 5 Amp average AC or True RMS 3 1/2 Digit with 0.56” or 0.8” LEDs

The DX-35-ACA, a cost-effective, AC current measuring meter with a very low burden of 0.5VA respectively. Its internal shunt provides for direct connection to 5A CT’s (current transformers). No matter what the CT ratio, the 15 turn, infinitely adjustable Span potentiometer enables the user to easily scale the output to display almost any current value required up to 1999A. The DX-35-ACA meter can withstand momentary over loads of up to 200 Amps (40 times input signal) for one second without developing an open circuit. Our unique differential AC measurement circuit provides high impedance to ground on both sides of the shunt.

Features:

• Pre-calibrated I-Series Input Signal Conditioning modules, that have span or zero potentiometers, can be interchanged between any I-Series compatible meter, without recalibration, because all of the analog scaling and reference circuitry is self-contained within the module.
• 24 V DC excitation is available to power external transmitters and 5 or 10 V DC excitation is available for strain-gages, load cells and resistance bridge type sensors.
• AC/DC Auto-sensing power supply. For voltages between 85-265 V AC / 95-300 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
• Standard red or optional green or super bright red 3 1/2-digit 0.56” LED with display range –1999 to 1999 (4000 counts).
• Red or green 0.8" LED large display option.
• Display brightness may be externally controlled.
• 1/8 DIN (96 x 48mm ) case easily mounts in thin or thick panels (up to 2’). May be ordered with optional extra fire resistant metal case.
• Optional NEMA-4X, IP-65 hinged, lockable, water and dust proof cover.
• UL Listed